You have no items in your shopping cart
The CAPiTA Spring Break Slush Slasher 2.0 Snowboard doesn't do "serious", and it doesn't think you should either. This playful little deck is the heart and soul of the entire Spring Break line, designed to be ridden with your tongue planted firmly in your cheek and a huge smile plastered across your face. The latest model has been redesigned from the ground up with a deeper, carvier sidecut and a new Surf Camber profile that improves freestyle versatility. Slap your bindings on, set phasers to DGAF, and go have some fun, dang it!
Surf Camber Profile – The SURF CAMBER features smooth arcing tip and tails and camber through the inserts. The gentle low angle allows for maximum float and control.
Flex Rating – 4 (1 Soft - 10 Stiff)
Radial Sidecut – A RADIAL sidecut is a single radius design that allows your board to start and finish a turn on the same arc.
FSC Certified Dual Core™ – The FSC® CERTIFIED DUAL CORE™ was built to achieve the consistent, dependable feel required from riders looking to take their skills to the next level. This lightweight core has zero irregularities and a consistent, uniform flex, combining lightweight Poplar with Beech for increased power and durability.
Special Blend Fiberglass – This configuration uses an optimum blend of 626g/m2 Biaxial fiberglass laminated in conjunction with structural additives to customize performance objectives.
Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.
Inlaid Alloy Skid Plates – Reinforced with an ultralight skid plate, refined and reshaped to shave weight.
Full ABS1000 Sidewalls
Superdrive™ Base – The SUPERDRIVE™ base material lives in the Sintruded category of boards that deliver benefits of both sintered and extruded bases. These bases take the characteristics and manufacturing techniques used in creating extruded base material, but due to higher pressure and temperature, increase the surface hardness to levels near most sintered bases. This expands the durability and surface strength, creating a base that will be more durable when jibbing and ripping around the mountain while retaining a low maintenance and carefree lifespan of the board.
360 Degree HRC48 Steel Edges
PLT™ Topsheet Technology – PLT™ technology is exclusive to CAPiTA MFG and magically bonds the topsheet to an already pressed snowboard.
Multitech™ Level 5 DeepSpace™ Silkscreen – The DEEPSPACE™ Design Theory takes advantage of the thickness of a transparent topsheet. Strategically layering ink on multiple levels from the top and the bottom imbues graphics with a sense of life through depth.
Sublimation Base Graphic
Inlaid Alloy Tail Skid Plate – MAKE SPARKS! with an ultralight skid plate, refined and reshaped to shave weight.
Stainless Steel 2 x 4 Inserts
|Effective Edge (mm)||1133||1172||1211||1250|
|Tip Width (mm)||315||320||325||330|
|Waist Width (mm)||262||263||264||265|
|Tail Width (mm)||300||300||300||300|
|Sidecut Radius (m)||6.8||7||7.2||7.4|
|Stance Range (in)||22||22.4||22.8||23.2|
|Rider Weight (lbs)||90-160||110-170||130-180||150-200+|